Load Bearing: More Than 40 Tons (can be installed in the middle of the road)
Warranty: 18 Months
Body material: Aluminium(GB-ADC-12)+PC(Japan Brand)
Power supply: USA Brand Flexible High Efficient Solar Panel
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Embedded Solar Stud For Road C2 Features:
Embedded Solar Stud For Road C2 Parameters:
|Power supply:|| USA Brand High Efficient Solar Panel
5V/60MA for lithium battery
3V/120MA for super capacitor
|Battery:|| Lithium battery 3.2V/500MA(made in Japan);
Supercapacitor 2.3V/120F(made in Korea)
|Working model:|| Blinking or Constant
Charging in the daytime and working automatically at night
|Life span:|| 5years for lithium battery;
10years for supercapacitor.
|Resistance:||> 40T(can be installed in the middle of road)|
|Carton Size:|| 1pcs/box; 30pcs/ctn; weight: 30kgs; carton size: 67.5*28*20cm
1pcs/box; 30pcs/ctn; weight: 66.14bs; carton size: 26.57″*11.02″*7.87″
Application of Embedded Solar Stud For Road C2:
♥Schools and hospitals
♥High traffic areas
♥Parks and campuses
How to install Embedded Solar Stud For Road C2:
1.Carefully mark the distance between the placement of Embedded Solar Stud For Road. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 127mm and depth will be 45mm.
2.Remove all debris from the installation hole.
3.Pour epoxy into the holes per the manufacturer’s instruction.
4.Verity that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the Solar Stud For Road shaft.
5.Set the lighting surface of the Solar Stud For Road to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and Solar Stud For Road shaft.
After curing the LED Solar Stud For Road for 6-8 hours, remove the installation of the isolation facility.