Body Material: ABS
Size: 102*102*22mm+50mm (4.02″*4.02″*0.87″+1.97″)
Filling: Epoxy+Quartz sand
Lens Material: PMMA
Reflective Solar Stud For Road Features:
•Reflective studs water, oil, chemical, and heat resistance.
•Reflective Solar Stud For Road can work more than 3 years normally.
•Very high reflectivity.
•Reflective Solar Studs For Road easy installation with glues.
•Photometric values:exceeds 600(mcd/lux).
Reflective Solar Stud For Road Parameters:
| Body material: | ABS |
| Filling: | Epoxy+Quartz Sand |
| Lens Material: | PMMA |
| Reflector type: | Double side/Single side |
| Quality: | ASTM D4280 & EN1463-1 standard |
| Size: | 102*102*22mm+50mm (4.02″*4.02″*0.87″+1.97″) |
| Packing: | 38*36*22.5cm, 50pcs/ctn (14.96″*14.17″*8.86″, 50pcs/ctn) |
| Weight: | 320g/pc; 19kg/ctn (0.71bs/pc; 41.89bs/ctn) |
Installation Method Of Reflective Solar Stud For Road:
1. Determine the installation location and distance, clean the road surface, and ensure that the Reflective Solar Studs For Road are installed on a flat road surface.
2. Clean the bottom of the road studs and apply the epoxy glue evenly to the back of the studs.
3. Press the side with the glue on the road, fix the position, wait for the glue to dry.
4. Check within 2 hours of installation to ensure that all Reflective Solar Studs For Road are not installed incorrectly and are not bent or deformed due to compression.
5. Remove the installation isolation facility within 6-8 hours after the installation of the Reflective Solar Studs For Road.
